Aerolite Technical Data

CompositionHydrated calcium silicate, reinforcing fibres and natural fillers. Free from formaldehyde and other harmful materials. Does not contain any toxic ingredients
Manufacturing ProcessLime and silica are reacted to produce hydrated calcium silicate slurry which is mixed with reinforcing fibres and fillers and moulded to form a tile in filter presses. These tiles are dried, trimmed, punched and fissured (if required) and then coated to the required surface finish.
SurfaceAll tiles are prime coated on both sides. Standard finish in two coats while dispersion type, solvent-free paint.
Dimensions600 mm x 600 mm x 15 mm edge. Sizes referred to are always module sizes. The exact or nominal panel size may differ depending on the suspension system used.
Density350 - 450 kg/ m3
Relative Humidity100% RH resistant
Fire ResistanceNon combustible as per BS 476, Part 4,
Class 1 for spread of flame as per BS 476 Part 7
Class 0 for fire propagation as per BS 476, Part 6
Thermal Conductivity0.043 W/mok.
Acoustic Control sound absorption NRC - 0.10 to 0.75 depending on the surface finish.
Light Reflectance>85%
Weight5 - 5.5 Kg./m2
Suspension SystemsSuspension system made of roll-formed hot-dipped galvanised steel.